Product
HT Top Quality Raised Access Floor with high load capacity for Data Center is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been
phosphoreted. There is foaming cement fully filled. The surface is stuck with High Pressure Laminate (HPL)
or Conductive PVC tile. The borders are trimmed with conductive rubber edges.
Application of HT Top Quality Raised Access Floor with high load capacity for Data Center
Computer room, data center, control room, laboratory, office building, bank, post telegraph, power control center,
workshop and places where require antistatic environment or have many wires.
Characteristics of HT Top Quality Raised Access Floor with high load capacity for Data Center
Excellent antistatic performance
Flame retardant, antiskid, antirust, antisoil
Mighty glue, strong wearability, non-bubble, non-degumming
Class A flame spread and smoke development rating
Zinc Galvanized Pedestal&Stringer
Hot-dipped Galvanized Pedestal&Stringer
Power Coated Zinc Galvanized Pedestal&Stringer
Technical Parameter OF HT Top Quality Raised Access Floor with high load capacity for Data Center
Type | Size | Uniform load | Concentrated load | Rolling load | Impact load | Ultimate load | ||
0.100''/2.5mm DEFLECTION | 10PASS | 10KPAAASS | ||||||
FS662 | 600*600*35mm | 14.71KN/ | 2.94KN | 300KG | 2.45KN | 2.00KN | 100LB/45KG | 8.85KN |
610*610*35mm | ||||||||
FS800 | 600*600*35mm | 17.78KN/ | 3.56KN | 363KG | 2.94KN | 2.45KN | 100LB/45KG | 11.25KN |
610*610*35mm | ||||||||
FS1000 | 600*600*35mm | 22.22KN/ | 4.45KN | 454kG | 3.56KN | 2.67KN | 150LB/68KG | 14.50KN |
610*610*35mm | ||||||||
FS1250 | 600*600*35mm | 27.78KN/ | 5.56KN | 567KG | 4.45KN | 3.56KN | 150LB/68KG | 18.36KN |
610*610*35mm | ||||||||
FS1500 | 600*600*35mm | 33.34KN/ | 6.68KN | 680KG | 5.56KN | 4.45KN | 175LB/68KG | 22.17KN |
610*610*35mm | ||||||||
FS2000 | 600*600*35mm | 44.45KN/ | 8.89KN | 907KG | 6.67KN | 5.56KN | 175LB/79KG | 29.42KN |
610*610*35mm |